SPECIFICATIONS

Power Output per Channel - 200 Watts
Number of Channels - 2
Speaker Impedance - 2, 4, or 8 Ohms
Rated Power Band - 20Hz to 20kHz
Total Harmonic Distortion - 0.005%
Dynamic Headroom - 2dB
Frequency Response +0,-0.5dB - 20Hz to 20kHz.
Frequency Response, +0, -3dB - 10Hz to 100kHz
Sensitivity Phono (Moving Coil) - 0.25mV
Sensitivity Phono (Moving Magnet) - 2.5mV
Sensitivity High Level (Balanced / Unbalanced) - 0.5V/0.25V
Sensitivity (Power Amp input) - 1.4V
Signal To Noise Ratio (Moving Coil) - 80dB
Signal To Noise Ratio (Moving Magnet) - 82dB
Signal To Noise Ratio (High Level) - 95dB
Signal To Noise Ratio (Power Amp input) - 113dB
Input Impedance (Balanced / Unbalanced) - 20K/20K
Damping Factor - >40
Maximum Output (Balanced / Unbalanced) - 8V Unbalanced
Balanced Input - 1
Unbalanced Input - 5
Phono Input Moving Coil - 1 (adjustable loading)
Phono Input Moving Magne - 1 (fixed loading)
Upgradeable Digital Audio Module - Yes
Digital Coaxial Input - 2
Digital Optical Input - 2
Digital MCT (DIN) Input - 1
Digital USB Input - 1
Balanced Variable Output - 0
Unbalanced Fixed Output - 0
Unbalanced Variable Output - 2
Headphone Output - 1/4" High Drive with Headphone Crossfeed Director (HXD®)
Subwoofer Output - 0
AM/FM Tuner option -  No
Home Theater PassThru - Yes
Unbalanced Analog Connector Type - Standard
Speaker Binding Post Type - Standard
Service Port - 1
Digital-to-Analog Converter (DAC) Type - 8-channel, 32-bit/192kHz PCM/DSD, Quad Balanced
Digital Coaxial Input Sample Rate - 24-bit/44.1kHz to 192kHz
Digital Optical Input Sample Rate - 24-bit/44.1kHz to 192kHz
Digital MCT (DIN) Input Sample Rate - 16-bit/44.1kHz (CD). DSD64 (SACD)
Digital USB Input Sample Rate - 32-bit/44.1kHz to 384kHz (PCM). DSD64, DSD128, DSD256, DXD352.8kHz, DXD384kHz
Tone Controls - Bass and Treble
Tone Bypass and Input Assign - Yes
RS232 Control Input - Yes
Power Control Output - 1 Main, 2 Trigger
Rear Panel Data Port - 4
Rear Panel IR Sensor Input - Yes
Input Level Match - Yes
Vacuum Tube or Solid State - Solid State
Output Type - Autoformer™
Output Meters - Yes
Dual Layer Chassis - Yes
Chassis Finish - Black painted steel
McIntosh Monogrammed Heatsinks™ - Yes
Power Requirement - 120V 50/60Hz, 4.4 amps
Standby Power Requirement - <0.25 Watts
Dimensions (W x H x D) - 17-1/2" (44.45cm) x 7-5/8" (19.37cm) x 22" (55.88cm)
Weight - 75 lbs (34.1 kg)
Shipping Weight - 93 lbs (42.3 kg)

MER INFORMATION HÄR

About MA7200
Making up its 14 inputs are 8 analog connections (5 unbalanced, 1 balanced and 1 each of Moving Coil and Moving Magnet inputs for turntables) along with 6 digital (2 each of coaxial and optical plus 1 USB and 1 proprietary MCT for use with our MCT500 SACD/CD Transport). The digital inputs are housed in our DA1 Digital Audio Module, which can easily be replaced by future modules to keep your MA7200 current with the latest digital audio technologies.

The DA1 comes with an 8-channel, 32-bit Digital-to-Analog Converter (DAC) used in Quad Balanced mode. The USB input accepts PCM signals up to 32-bit/384kHz and supports up to DSD256 and DXD 384kHz for high resolution audio playback, while the coax and optical inputs will decode music up to 24-bit/192kHz. All inputs can be given custom names for user-friendly system control and configuration.

The MA7200
Includes our Monogrammed Heatsinks™ which are so efficient at dissipating heat that they warrant bearing the McIntosh “Mc” logo. They are connected to advanced high current output transistors that eliminate warm-up time so you can enjoy the MA7200’s full sonic capabilities from the moment you turn it on.

The MA7200 is full of other McIntosh technologies including Autoformers™ to deliver the full 200 Watts to each of your speakers regardless of their impedance, Power Guard®, Sentry Monitor™, Home Theater PassThru, bass and treble tone controls, High Drive headphone amplifier with Headphone Crossfeed Director (HXD®), and gold-plated speaker binding posts.

The entire unit is wrapped in the timeless McIntosh appearance with blue watt meters, a black glass front panel with aluminum end caps, control knobs and illuminated logo.

DA2 Module
The DA2 Digital Audio Module builds upon the DA1 with an expanded set of capabilities. In addition to having all the same connections as the DA1, a new audio-only HDMI Audio Return Channel (ARC) connection is included on the DA2. This allows it to be connected to TVs with a compatible HDMI (ARC) output to bring TV sound to the next level by listening to it through a home stereo system.