System Type - 2 way, rear ported
Recommended amplifier power - (Watt RMS) 35- 150
Continuous power handling - (Watt RMS) 75
Sensitivity - (2.83 Volt @ 1m) 91dB
Nominal impedance - 8 Ohm
Frequency response - (-6dB typical in room) 32Hz- 28kHz
Drive unit complement - 2 x 150mm multi-fibre bass/ mid 1 x 25mm polyester dome tweeter
Crossover frequency - 3.2kHz
Crossover type - 2nd order low pass, 3rd order high pass -
Dimensions - HxWxD 962 x 190 x 271mm (37.9 x 7.5 x 10.7”)
Weight - Each 14.6kg (32.2lb)
Finishes- Walnut / Black Ash / Light Oak / White. Contact us to order or check if the finish you want is in stock.

MER INFORMATION HÄR

The Fyne F303 Floorstanders

The flagship of the F300 series is an impressive floor standing loudspeaker capable of huge scale dynamics and highly detailed top end articulation. Featuring two potent 150mm (6”) mid/bass drivers, and a 25mm polyester dome tweeter delivering an authoritative performance with power and passion.

High output levels and an easy to drive load make the F303 suitable for a wide range of home entertainment amplifiers and applications.

Employing a D’Appolito driver configuration, positioning the tweeter centrally between the two bass / midrange drivers, provides a smooth dispersion characteristic through the critical crossover region. The sweet spot is widened, resulting in enhanced musical performance on or off the loudspeaker’s main axis.

Meet the f300 series
The price may be entry level but the F300 range benefits from the very best technical and acoustic expertise in the loudspeaker industry. Offering a scale of specification and audiophile performance unrivalled at its price, the line-up provides versatility for music lovers or movie enthusiasts.

With a choice of two bookshelf or stand-mount models, two floorstanders, a centre channel and dipole speaker, there are plenty of options to suit a wide variety of listening environments.

Cabinet
A well-constructed cabinet is the starting point for any high-performance loudspeaker. Exceptional rigidity is provided on all F300 models through a combination of MDF panels which are cross-braced internally.

Additional stiffness is achieved by coupling the low frequency driver’s magnet to the cabinet bracing using a resonant-absorbing mastic. Widening the footprint on the floor standing models, using a plinth with floor coupling spikes, provides stability for tight bass and accurate stereo imaging.

Crossover
Optimal performance of each of the F300 models is assured by using high quality precision components within the crossover, including low loss LF laminated core inductor and HF polypropylene capacitors. Although the designs are computer optimised, fine-tuning is always undertaken through critical auditioning.

The gold-plated speaker terminals ensure a clean signal path and the top of the range F303 has bi-wire terminals fitted to further enhance performance.

Driver technology
Fyne Audio aims to provide best in class performance at all price levels and the careful component selection for the F300 drivers helps to meet this goal.
Utilising a multifibre paper cone on the bass / midrange drivers delivers a natural sounding midrange and clean transient behaviour.

Fitted to the centre of the driver is a phase plug which provides smooth midrange roll-off characteristics.

FyneFluteTM technology, used on the driver’s roll rubber surround, provides a non-homogeneous interface which very effectively terminates cone energy.

Tweeter
The tweeter combines a powerful Neodymium magnet system with a 25mm Polyester dome producing crisp and controlled high frequency detail. Integrated within the protective mesh cover is a phase loss compensator which delays the output from specific areas of the dome to give a smooth and extended response.

We may be a new name in audio but…
When you invest in a pair of FYNE AUDIO loudspeakers, you’ll be pleased to know that the development of each product has been undertaken by an enthusiastic and experienced team who have been in the loudspeaker business for very many years.

At every level of the design process, be it acoustic know-how, mechanical engineering, choice of materials or manufacturing expertise, our loudspeakers have been tuned to offer best in class performance.