Bryston B-135 Cubed, Integrated

85,690kr90,790kr

B135³ Integrated Amplifier
The Bryston B135³ Integrated Amplifier is without question one of the most sonically transparent and reliable audio products available. It offers performance levels equal to the finest separate audio components.

Please contact us for optional DAC and Phono.

 

Nollställ
Alltid
  • Snabba leveranser
  • Fri frakt i Sverige på varor över 500 SEK
  • Garanterat säkra betalningar
  • Kort, Delbetalning, Faktura, Leasing, Swish och PayPal

Features:
135W into 8 Ohms (180W into 4 Ohms)
Over 30,000 MFD of filter capacitance per channel
Three ultra-low-noise power transformers
Separate ground paths for Digital and Analog
Gold plated switch, contacts, and connectors
Pre-out/main in connectors
Convection cooled and housed in a fully aluminum chassis
RS-232 serial data port for remote control via Crestron, AMX or similar control systems
Options:
Available with silver or black faceplate
17” or 19” faceplate available (non-rack mountable)
Optional internal DAC or internal MM phono (see Accessories in Other Products)
BR2 remote control available (see Accessories in Other Products)
*Only available with internal DAC, SPDIF replaces RCA single ended pair.

Amplifier Section
8Ω Load: 135W
High: 1.0V 100W High: 1.16V 135W
60Hz + 7kHz 4:1 ≤0.005%
>60V / μS
20Hz, 8Ω >500
Preamplifier Section
20Hz – 20kHz ±0.05dB 500mV
Sections Combined
Standby: <1W Idle: ≤70 2 Ch. 17W 8Ω: 210 2 Ch. 135W 8Ω: 500
Amplifier Gain
High: 29dB
28.28 V/V
Input Impedance
Single Ended
≈30kΩ
THD+N
20Hz-20kHz @ 135W, 8Ω
≤0.005%
Bandwidth
100kHz
IMD or THD
<0.003%
Noise
20Hz – 20kHz, ref. 1V Input
-100dB
Weight
Pounds: Kilograms:
26.5 12
Heat Load (BTU/Hour)
Idle: 2 Ch. 135W 8Ω:
≤239 1706

MER INFORMATION HÄR

B135³ Integrated Amplifier

The Bryston B135³ Integrated Amplifier is without question one of the most sonically transparent and reliable audio products available. It offers performance levels equal to the finest separate audio components.

Inputs: 6x RCA Single Ended Pairs, 2x RCA Single Ended Pairs (Record In, Power Amp In), 2x Optical (TOSLINK)*, 2x SPDIF (RCA)*
Outputs: 2x RCA Single Ended Pairs (Record Out, Preamp Out), Speaker Terminals, ¼” Headphone Jack
Control: RS-232 (DB9), AUX IR, 2x 12V Output Triggers

Bryston Ltd
Bryston Ltd. has been designing and manufacturing state of the art specialty electronics to both the consumer and professional audio marketplaces for over 35 years.

Bryston has a major commitment in producing the most accurate and reliable product available by maintaining an extensive research and development division which is constantly looking for ways to improve the performance, value, and reliability of our products.

Bryston engineers are never constrained by design costs for functionality. On the contrary, Bryston challenges their engineers to create the finest products they can; to source and use the best components; to move Bryston equipment ever-closer to perfection, while maximizing performance and reliability.

Following in the fine tradition of artisan craftsmanship worldwide, every audio component is handcrafted by people who take tremendous pride in building the very best. Each component is hand selected and installed, every wire is cut and bent by hand, and every connection is hand soldered.

In the consumer market Bryston manufactures state of the art audio electronics intended to provide the owner with the most musically accurate and reliable performance available. In the professional market Bryston offers amplifiers for recording studios, radio and television broadcast facilities, and sound reinforcement applications such as stadiums and arenas, etc.

Each of Bryston’s fully assembled products is extensively tested before shipment. During 100 hours of continuous testing, Bryston amplifiers are monitored through a range of input cycles and thermal stress levels to duplicate a broad spectrum of operational loads. If any failures occur, Bryston will catch them during the manufacturing process, before you begin using the product.

Bryston’s dedication to creating the most reliable products is clearly evident in their 20 year analog and 5 year digital warranty.

Bryston products allow you to enjoy a generation of sound, music, and incredible performance. Bryston is based in Peterborough, Ontario, Canada, just northeast of Toronto, and is sold through over 150 dealers in North America and 60 countries worldwide.

Our goal
For over 30 years, Bryston has had a continuing commitment to design and manufacture the most accurate and reliable audio electronics.

The performance, value, and reliability of our amplifiers, and our unrivaled warranty, have brought us recognition in the world of pro audio, as well as with reviewers and home users. But there is no product that cannot be made better.

To this end, we maintain an extensive research and development program, constantly investigating techniques, technologies, and devices that promise improvements to all aspects of our amplifiers.

The Bryston SST2 C–Series is the direct result of this on-going quest, and represents a significant step forward in the art and science of audio amplification.

Brands

Bryston

Mer information

Color

Black, Silver

Remote

Yes, No