Tack för att du väljer produkter med hög kvalitet!

Du har produkten längre, har mer glädje av den, det är ekonomiskt och bättre för vår planet. Vi kommer att göra vårt bästa för snabb och säker leverans. Tveka inte att höra av dig om du har frågor.

 

Audio Technica AT33PTG/II

AT33PTG/II
MOVING COIL CARTRIDGE

6,490kr

Se alla betaltjänster:

KLARNA, DINTERO, PAYPAL, WASA

SKU: audio-technica-at33ptgii Categories: , Tags: , , ,

Önskar du rådgivning inför val av produkt?

Hör gärna av dig till oss!

AT33PTG/II
MOVING COIL CARTRIDGE
Advanced nude tapered boron and weight reduction
This model succeeds in thinning down and shortening the cantilever, compared to the AT33PTG. The coil impedance is also refined from 17W to 10W. We realized significant weight reduction of the vibration system and successfully improved the basic performance and sound quality of the cartridge.

High performance and long-life MicroLinear™ stylus
MicroLinear™ (ML) is a specially polished line contact stylus. This has better high range performance than the conical or elliptical stylus due to its small curvature radius and realizes low distortion and expanding high range reproduction even when playing at the inner circumference of records. And the constancy of the line contact shape is one of its main features with an average product lifetime of around 1000 hours.

Ytterligare information

Specifications

Type Dual Moving Coil
Mounting 1/2" Centers
Frequency Response 15 – 50,000Hz
Body Material Aluminium/Synthetic Resin
Channel Separation 30dB (1kHz)
Output Channel Balance 1dB (1kHz)
Output Voltage 0.3mV (1kHz and 5cm/sec.)
Vertical Tracking Angle 23°
Vertical Tracking Force Range 1.8 – 2.2g (2.0g standard)
Stylus Shape MicroLine™
Stylus Curvature Radius Micro linear
Stylus Construction Nude Square Shank
Cantilever Gold-plated solid boron
Coil Impedance 10Ω (1kHz)
Coil Inductance 22µH (1kHz)
DC Resistance 10Ω
Static Compliance 40×10-6cm/dyne
Dynamic Compliance 10×10-6cm/dyne (100Hz)
Terminal Pins Brass
Recommended Load Impedance Min 100Ω
Weight 6.9g
Dimensions H16×W16.6×D26.5mm
Replacement Stylus When the stylus is to be replaced, replace the entire cartridge. Take the used cartridge to your Audio-Technica Authorised Service Centre. The new cartridge, or any other model which is desired among the line-up of MC cartridges sold by Audio-Technica, are available at the stylus replacement price.
Accessories Included 1 non magnetic screw driver; 2 washers; 2 Nuts; 2 x 13 mm mounting screws; 2 x 19 mm mounting screws; 1 plastic protector; 1 set of PCOCC Lead Wires(AT6101)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.