McIntosh MC611 Dual Mono

213,000kr

Mycket potenta monoförstärkare med hög kvalité.

4 728kr/mån

Så funkar leasing

  1. Leasing erbjuds företag på köp från 2 400 kr till 2 000 000 kr.
  2. Beställningen slutförs med BankID av bolagets firmatecknare i kassan. Är det fler firmatecknare som ska signera så fyller du i deras epost för att skicka en signeringslänk.
  3. Wasa Kredit äger utrustningen under leasingperioden, ert företag har nyttjanderätt. Månadskostnaden är fullt avdragsgill och ni behöver inte göra avskrivningar på utrustningen. Efter periodens slut övergår ägandet till ert företag för det förutbestämda restvärdet.

Räkneexempel för varukorg 213 000.00 kr

4 728 kr per månad i 48 månader. Restvärde 21 300 kr. Uppläggningsavgift 450 kr.

Artikelnr: mcintosh-mc611 Kategori: Taggar: , , , Brand:

Beskrivning

ELECTRONIC SPECIFICATIONS
Power Output per Channel – 600 Watts @ 2, 4 or 8 Ohms
Number of Channels – 1
Total Harmonic Distortion – 0.005%
S/N below rated output – Balanced: 124dB.  Unbalanced: 120dB
Dynamic Headroom – 2.8dB
Damping Factor – >40 Wideband
Rated Power Band – 20Hz to 20kHz
Frequency Response – +0, -0.25dB from 20Hz to 20,000Hz.  +0, -3.0dB from 10Hz to 100,000Hz

CONTROL
Remote Power Control – Yes
Multi-Channel DB25 Cable – N/A

GENERAL SPECIFICATIONS
Circuit Configuration – Quad Balanced
Circuit Design – Solid State
Mono Bridge – N/A
Mono Parallel – N/A
Autoformer – Yes
Meters – Yes – Meter Light Switch
Yes – Balanced Input
1 – Front Panel
Glass with handles – Illumination
Direct LED – Chassis Style
Polished stainless steel & black painted steel

CONNECTIVITY
Speaker Binding Post Type – Patented Solid Cinch™ Speaker Binding Posts

WEIGHTS & DIMENSIONS
Dimensions (W x H x D) – 17-1/2″ (44.45cm) x 9-7/16″ (23.97cm) (including feet) x 22″ (55.88cm) (including front panel, handles and cables)
Weight – 97.5 lbs (44.32 kg)
Shipping Weight – 130.5 lbs (59.32 kg)

MER INFORMATION HÄR

The monoblock MC611
Quad Balanced Power Amplifier produces 600 Watts of power – enough to satisfy nearly any loudspeaker. A pair of MC611s can easily drive an impressive home stereo system, or add more of them to power a home theater. Thanks to our unique output Autoformer™ technology, your speakers will receive the full 600 Watts regardless if they have 2, 4 or 8 Ohm impedance, allowing you the ability to use the MC611 to its full potential.

The MC611 has received numerous updates and improvements compared to our previous 600 Watt monoblock model. Chief among them is that filter capacity has been doubled which has resulted in a dramatic 55% increase in dynamic headroom from 1.8dB to 2.8dB. This twofold increase in filter capacity also helps improve the performance of low end bass frequencies.

The front panel features
New direct LED backlighting for improved appearance and color accuracy. On top, the audio Autoformer and power transformer remain seated just behind the front panel, but are now contained in new glass topped enclosures. Behind them are 2 of our Monogrammed Heatsinks™ which connect to advanced high current output transistors that help eliminate thermal equilibrium lag time.

A screening of the amplifier’s block diagram has been added to the panel located between the heatsinks.

On the back,
There continues to be 3 sets of our Solid Cinch™ speaker binding posts (1 set for each speaker impedance), but more space has been added between each set to allow for easier speaker cable management. Our eco-friendly power management system, which will turn the amp off after a set amount of time when no input signal has been detected, has also been added. Other enhancements include heavier gauge internal wiring and upgraded circuit components.

In addition to all these improvements

  • Power Guard® that monitors and adjusts the input signal at the speed of light and makes real time adjustments to prevent harsh sounding and potentially speaker damaging clipping
  • Sentry Monitor™ – our fuse-less short-circuit protection circuit that disengages the output stage before current exceeds safe operating levels and then resets automatically when operating conditions return to normal
  • Quad Balanced design that cancels virtually all noise and distortion that may have crept into the audio signal
    Power Control to send power on/off signals to other connected McIntosh components for easy system power up and shutdown

Both a balanced and unbalanced output are included to make bi-amping or tri-amping your speakers easier; they can also be used to send the audio signal to a secondary system if your preamplifier does not have enough outputs, or to connect a powered subwoofer.

The MC611 sits on a beautiful polished stainless steel chassis and features the timeless McIntosh aesthetic of a black glass front panel, illuminated logo, control knobs, aluminum handles and of course a large 8” (20.3 cm) fast responding blue Watt meter.

Recensioner

Det finns inga produktrecensioner än.

Bli först med att recensera “McIntosh MC611 Dual Mono”

Denna webbplats använder Akismet för att minska skräppost. Lär dig hur din kommentardata bearbetas.