Tack för att du väljer produkter med hög kvalitet!
Du har produkten längre, har mer glädje av den, det är ekonomiskt och bättre för vår planet. Vi kommer att göra vårt bästa för snabb och säker leverans. Tveka inte att höra av dig om du har frågor.
Legacy Audio I V2
Take advantage of the increased dynamic capability of high resolution recordings with the Legacy i·V2 dual mono amplifier. You will enjoy a lower noise floor in your recordings, stronger crests, and increased dynamic resolution.
57,200kr
Se alla betaltjänster:
KLARNA, DINTERO, PAYPAL, WASA
Önskar du rådgivning inför val av produkt?
Hör gärna av dig till oss!
Specifikationer
| Power Rating: | 1000 watts per channel x 2 @ 4 ohms, all channels driven 610 watts per channel x 2 @ 8 ohms, all channels driven |
|---|---|
| Peak Power: | 1.2 kW peak power from any channel @ 4 Ohm/1kHz with less than 1% distortion |
| Over Current Protection: | Breaker reset for excessive sustained current |
| Inputs: | Fully balanced XLR, single-end RCA |
| Outputs: | Gold plated safety approved five-way binding posts |
| Damping factor: | 750 average, 20Hz to 1kHz |
| Voltage Gain: | 25.8 dB |
| Dynamic Range: | 127dB, A- weighted |
| Voltage/Current: | 98 Vp / 38Ap |
| Input Sensitivity: | 5.0Vp @ 1200W/4 Ohm |
| Input Impedance: | 38 kOhm for both pin 2+ and pin 3- |
| Channel Separation: | 120 dB at 1kHz |
| Unit Shipping Weight: | 30 lbs |
| Unit Dimensions: | 17.5" W x 15.6" D x 5.8" H |
| Notes: | Highest power output can be obtained using a single 230V, 20A line or dual 120V, 20A lines. A conventional single AC cord is also provided. |
Recensioner och artiklar
Legacy i·V 7 “Does That Extra Power Make A Difference? In My Listening It Certainly Did.”
Legacy Audio “Makes Sharp Throw Into The Future: i·V Amp is Revolutionary”
Legacy i·V7 Sound & Vision Top Pick, Best Gear of Summer 2020
New Legacy i·V “Powerhouse Amplifiers” Audioholics Interview with Bill Dudleston
Läs mer om I-V2 här
Take advantage of the increased dynamic capability of high resolution recordings with the Legacy i·V2 dual mono amplifier. You will enjoy a lower noise floor in your recordings, stronger crests, and increased dynamic resolution.
Featuring state of the art ICEedge® technology, the elegant i·V2 amplifier approaches 80% efficiency while delivering over 600 watts per channel into 8 ohms, both channels driven. Such exceptional power is the product of very high current (i) and voltage (V) output capabilities providing stability into low impedances with a peak output current capability of 38A.
i·V 2 Features:
- Short circuit protection
- Thermal protection
- Triggered On/Off
- Standby switch
- Front panel status indicator
Say goodbye to excessive heat and transformer hum. The crystal-clear sound is virtually noise-free and reliability is assured- after all, it’s a Legacy.
High amplifier power assures the proper snap in transients and prevents clipping that can damage high frequency drivers. Higher power means dense musical arrangements will avoid the smearing, strain and the inevitable distortion as complex passages reach higher levels.
Ytterligare information
| Finish | Standard, Premium, Exotic |
|---|---|
| Se utföranden | Standard- Cherry, Black Oak, Medium Oak, Walnut |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.