Specifikationer

Power source - Prise CEI, 230 V AC, +7% ~ -10%, (117 V AC on demand). Maximum power consumption (2 x 100 /4Ω) : 310 VA, Maximum power consumption (2 x 70 W/8 Ω) : 210 W
Internal power supply - 2 x (± 44 V DC), double power supply
Power supply transformer - 300 VA toroidal transformer Two 10 VA power transformers (auxiliary voltages)
Main filtering - 2 x 44 000 µF
High voltage - + 280 V Stabilized, - 180 V Stabilized
Heating of the inlet tubes - 2 x 12 V DC Regulated and ground references voltages
Heating of the outlet tubes - 2 x 12 V AC Isolated AC regulated voltages
Power output and distribution - 2 x 70 W/8 Ω, 2 x 100 W/4 Ω. Output power distribution made by four complementary highly linear - power transistors «MOTOROLA ®» (225 W/15 A each)
Inputs - Phono MM, internal impedance: 47 kΩ, sensibility: 4 mV, RIAA Correction. 4 entry lines, internal impedance: 15 kΩ, sensibility 1 V. Pre-out, impedance 2 kΩ, after volume adjustment
Passband - 20 Hz - 20 000 Hz ± 1 dB
Internal impedance - Output: < 0.08 Ω General features Overall dimension - 118 x 420 x 370 mm Box size only - 100 x 420 x 340 mm Unit weight - 9,5 kg Manufacturer warranty - 5 years
Material - Aluminium & steel Colour - Mineral gray Accessories - Remote control, power supply cord, instruction manual Construction & design - Toulouse, Occitanie region, France

Läs mer om Kora's unika teknik, Square Tube

Kora TB140 Like the entire range of Kora amplifiers, the TB140 is powered by the Square Tube® operational amplifier. Equipped with 4 triodes per channel, this innovative assembling gives all its qualities to the amplifier.

SquareTube® provides every amplification functions. Its output voltage is the one that will be applied to the speaker outputs. Audio power transistors, exceptionally linear, are the only ones to provide what technicians call “impedance matching”. The transistors will give the speakers the required current, without amplifying the signal. Their role is somewhat the same as the one generally assigned to the output transformer.

However, the SquareTube® / Transistors combination does not know the difficulties associated with the usual transformers: > no phase shifts on low frequencies,

• no phase shifts on high frequencies,
• no bad coupling on low end,
• and above all: no current limitation!

The combination of SquareTube®’s high voltage capacity and the high current of the output transistors gives you an unmatched high definition power amplifier.

• The tubes give you softness, the transistors offer you unrestrained energy
• SquareTube® offers phase accuracy and will reveal an abundance of unsuspected details from your sources with natural dynamics.

Square Tube
Patented technology. The Square Tube technology is a new way of assembling the electronic tubes to amplify an audio signal.

The “SQUARE TUBE” is the result of long research and long-term assessment. The tubes – a well-known technology – are used in a modern and innovative way. Four tubes are used to make a single amplification stage, hence the name. Powered by two tensions, a positive and a negative, the Square Tube® delivers a signal which is symmetrical to the reference (the ground). That means that the signal alternatively reaches the positively charged domain (to push the membrane of the speaker) and the negatively charged domain (to pull the membrane). This innovative and original architecture along with the usage of vacuum tubes makes this scheme suits particularly well the staged amplification method.

In the Kora products, Square Tube technology ensures every amplification and audio signal control function. When the Square Tube is used in a power amplification device, at the end of the tube, the signal is identical to the one provided to the speakers. Complementary power transistors, audio and hyper-linear, provide the demanded current to the speakers, without interfering with the amplification signal. This makes this amplifier a true tube amplification device. The operation of the Square Tube is very sophisticated compared to all other vacuum tubes technologies.

How does the Square Tube implement these otherwise incompatible audio features?
The Square Tube is a tube amplification device, and tubes are not used as pre-amp. The tubes have a very clean amplification capability, however, it is quite limited. They are, generally speaking, more linear than transistors. To compensate for their weak gain, the Square Tube uses four on each stage. With this method, the distortion is reduced, compared to a traditional assembly.

The Square Tube is powered by two high tensions rails, each one delivering around 250 V (2 x 250 V). These tensions provide more than the power required by the “audio” signal. Therefore, the power used when the amplifier is at full power is around 20% of the total provided. In short: The Square Tube always operates in its “comfort zone”, and never close to its limits.

An amplifier built around the Square Tube module is not a hybrid (with transistors preceded by tubes), but a proper tube amplifier assisted by transistors. This structure allows to maintain the quality of the tube system and to avoid the current limitations of the output tubes. It also avoids the need for an output transformer, with all of its phase rotations…

What are the listening experience results?
The listening experience is natural thanks to the neutrality of the system, canceling the signals that lead to micro-distortions. Sometimes, an almost “acapella” sounding voice seems to arise from the void. The absence of artificial brilliance reveals a number of details, hence the impression of clarity of the message. The respect of the phases gives great spatial precision on the localization of every (single) instrument. The message sounds cleaned.

The result is remarkably striking when an orchestra is played: all the instruments are present, perfectly focused, and can be singularly followed with ease. In the power amplification section, the assistance transistors have no current limitations, resulting in the amplifier gaining to hold the speakers – which explains the limitless dynamics and the deep tones – but also in the lack of emphasis. Like in every tube-based amplifier, the feel of clipping is never perceived.

Do we need to insist on this? Well, all these qualities are balanced by a downside, unfortunately: the Square Tube® will harshly reveal the strict content of the signal! Built without the frills related to distortion (issues), some of your favorite musical tracks may suddenly seem very dull!