Western Electric 300B

17,450kr35,750kr

leasing
387kr/mån
Info Läs mer om leasing.
Wasa Kredit AB
Leasing Betala från 323 kronor i månaden
Totalbelopp 17 450 kr
Uppläggningsavgift 550 kr
Avtalstid Månadsavgift Restvärde
36 mån 496 kr 1 745 kr
48 mån 387 kr 1 745 kr
60 mån 323 kr 1 745 kr
Samtliga belopp är exkl. moms
Leasing via Wasa Kredit
– den smarta finansieringslösningen
Wasa Kredit äger varorna under leasingperioden, ert företag har nyttjanderätt. Månadsavgiften är avdragsgill. I slutet av avtalstiden köper du loss varorna för restvärdet. Leasing erbjuds för köp från 2 400 till 2 000 000 kronor.
Så här gör du:
Varukorg Lägg varorna i varukorgen och gå till kassan.
Avtalstid Välj mellan avtalstiderna 36, 48 eller 60 månader.
Kort Avtalsprocessen är automatiserad och kreditkontroll görs direkt i kassan.
Mobil Slutför beställningen med signering av BankID av bolagets firmatecknare.
Avtal När avtalet godkänts kan varorna levereras.

Otroligt fina 300B rör från Western Electric!

Nollställ
Alltid
  • Snabba leveranser
  • Fri frakt i Sverige på varor över 500 SEK
  • Garanterat säkra betalningar
  • Kort, Delbetalning, Faktura, Leasing, Swish och PayPal

Specifications

Classification
Moderate power, filamentary triodes for Class-A service.

Application
Audio-frequency amplifier in positions where power outputs of approximately ten watts or less are required at relatively low plate voltages.

Dimensions
Dimensions, outline diagrams of the tubes and bases, and the arrangement of electrode connections to the base terminals are shown in Figures 1 and 2.

Base and Mounting
These vacuum tubes employ medium, four-pin thrust type bases suitable for use in Western Electric 143B or similar sockets. The 300B tube has the bayonet pin so located that it may also be mounted in a Western Electric 100M, 115B, or similar socket.

The tubes may be mounted in either a vertical or horizontal position. If mounted In a horizontal position, the plane of the filament, which is indicated In Figure 2, should be vertical.

Average Direct Interelectrode Capacitances
Grid to plate 15 µµf.
Grid to filament 9 µµf.
Plate to filament 4.3 µµf.

Filament Rating
Filament voltage 5.0 volts, a.c. or d.c.
Nominal filament current 1.2 amperes

About Western Electronics

The filaments of these tubes are designed to operate on a voltage basis and should be operated at as near the rated voltage as possible. When alternating current is used for heating the filament, the grid and plate returns should be connected to a center tap on the secondary of the filament transformer.

The original triode. Direct from the manufacturer.
What if the best sound was achieved decades ago? In 1938, Western Electric manufactured the first type 300B electron tube. It was a breakthrough power triode, but in those days it hummed away from behind a curtain in early Hollywood sound systems. The same things that served moviegoers back then—low noise, ultra-long life, sonic purity and warmth—made it a standout tube for music lovers and vintage audio collectors as the years passed. Deep into the age of the transistor, communities around the world in search of true, original, high-fidelity sound rediscovered the 300B and its exceptional performance. New amplifier designs brought the tube front and center, its customary yellow lettering on proud display.

Sometimes, the old ways are the best
Today, the 300B is manufactured at the Rossville Works. Our new factory home was custom-built to master the dozens of individual demands of tube making, from sealing the iconic glass bulb to the complex metallurgic processes within. We’ve modernized the production line here and there to establish forward momentum at a company with 150 years of history. Western Electric believes twenty-first century listeners deserve twenty-first century manufacturing standards.

Balanced, Powerful, Refined
The WE 300B sound is balanced, powerful and refined with quality bass from the lowest frequencies through the upper bass. The midrange above is a thing of beauty; dulcet tones, seductive vocals, instruments of all types dimensional and present, all heightening the participatory elements of music.

Burnished and Beautifully Seductive
High frequencies are at once transparent, lovely, sweet, burnished and beautifully seductive. The air and space between performers are extraordinary, performers appear on a quiet and focused soundstage whose width and depth are masterfully rendered. You don’t have to search to find the sweet spot with a WE 300B amplifier, it’s all around you.

Find out what tube aficionados all over the globe know, the WE 300B is the most natural, elegant and emotive triode anywhere in the known universe.

CHARACTERISTICS
Average Characteristics
(Ef = 5.0 volts, a.c., Eb = 300 volts and Ec = -61 volts)
Plate current 60 milliamperes
Amplification factor 3.85
Plate resistance 700 ohms
Grid to plate transconductance 5500 micromhos

Limiting Operating Conditions for Safe Operation
(Not simultaneous ratings)
Maximum plate voltage: 450 volts
Maximum plate dissipation: 40 watts
Maximum plate current of an average tube for fixed grid bias: 70 milliamperes
Maximum plate current for manually adjusted grid bias or self-biasing circuit: 100 milliamperes

Recommended Operating Conditions
Recommended and maximum conditions for alternating-current filament supply are given in the table. Recommended conditions or others of no greater severity should be selected in preference to maximum conditions wherever possible. The life of the tube at maximum operating conditions will be shorter than at the recommended conditions.

Where it is necessary to operate the tube at or near the maximum plate current of 100 milliamperes, provision should be made for adjusting the grid bias of each tube independently, so that the maximum safe plate current will not be exceeded in any tube. Alternatively, a self-biasing circuit may be used, in which the grid bias for the tube is obtained from the voltage drop produced by the plate current of that tube flowing through a resistance.

Where it is necessary to use a fixed grid bias, the plate current of the average tube should be limited to a maximum value of 70 milliamperes, so that tubes having plate currents higher than the average will not exceed the maximum safe plate current.

Power Output and Distortion

Performance data including power output, second and third harmonic levels for a number of operating conditions are given in the table.

The variation of power output and harmonic levels with load resistance for several values of operating plate current is shown in Figures 7, 8 and 9, for a plate voltage of 350 volts.

The peak value of the sinusoidal input voltage, Egm, which gives the indicated power output, Pm and harmonic levels, F2m and F3m for each point in both the curves and the table, is numerically equal to the grid biasing voltage at that point. For a smaller input voltage Eg, the approximate levels may be computed from the following relations.

P=Pm(Eg/Egm)^2
F2=F2m+20 log10(Eg/Egm)
F3=F3m+40 log10(Eg/Egm)

CHARACTERISTIC CURVES
Plate-current characteristics for a typical tube are shown in Figure 3 as functions of grid bias, for alternating-current filament supply. The corresponding amplification-factor, plate-resistance, and transconductance characteristics are given in Figures 4, 5 and 6, respectively. When direct-current filament supply is used, and the grid and plate returns are connected to the negative end of the filament, the same characteristics are applicable if 3.5 is subtracted from the numerical value of each grid bias.

Mer information

Option

2 Matched Tubes, 4 Matched Tubes

Recensioner

Det finns inga produktrecensioner än.

Bli först med att recensera ”Western Electric 300B”

Denna webbplats använder Akismet för att minska skräppost. Lär dig hur din kommentardata bearbetas.