STAX SRM-007T2 DRIVER

21,990kr

leasing
488kr/mån
Info Läs mer om leasing.
Wasa Kredit AB
Leasing Betala från 407 kronor i månaden
Totalbelopp 21 990 kr
Uppläggningsavgift 550 kr
Avtalstid Månadsavgift Restvärde
36 mån 624 kr 2 199 kr
48 mån 488 kr 2 199 kr
60 mån 407 kr 2 199 kr
Samtliga belopp är exkl. moms
Leasing via Wasa Kredit
– den smarta finansieringslösningen
Wasa Kredit äger varorna under leasingperioden, ert företag har nyttjanderätt. Månadsavgiften är avdragsgill. I slutet av avtalstiden köper du loss varorna för restvärdet. Leasing erbjuds för köp från 2 400 till 2 000 000 kronor.
Så här gör du:
Varukorg Lägg varorna i varukorgen och gå till kassan.
Avtalstid Välj mellan avtalstiderna 36, 48 eller 60 månader.
Kort Avtalsprocessen är automatiserad och kreditkontroll görs direkt i kassan.
Mobil Slutför beställningen med signering av BankID av bolagets firmatecknare.
Avtal När avtalet godkänts kan varorna levereras.

STAX SRM-007T2 DRIVER
The Stax SRM-007t II Energiser is Stax’s flagship valve amplifier for use with the Stax range of electrostatic Earspeakers. It features four 6FQ7/6CG7 dual-triode valves, three inputs (one XLR and two RCAs), and can be used to power one or two sets of Earspeakers.

Nollställ
Alltid
  • Snabba leveranser
  • Fri frakt i Sverige på varor över 500 SEK
  • Garanterat säkra betalningar
  • Kort, Delbetalning, Faktura, Leasing, Swish och PayPal

The joy of pure balance amplification
The operational principle of the electrostatic condenser type is based on a system whereby plus and minus output signals are input by push-pull into two electrodes sandwiching a diaphragm with a high level of accuracy and equidistantly, resulting in the vibration of an ultra-thin membrane through the repulsive force and suction force of static electricity, which is then converted into sound. The balance method, which is considered to be the ideal for amplification, is thus extended to speakers. The electrostatic system entails input by balance, output by balance, and sound conversion by balance, and, in realizing all these features, constitutes the perfect balance system. It is the only system that makes it possible to listen to sound in the ideal manner permitted by the balance system.

  • We’ve taken another look at circuit constants and achieved a higher grade of reproducibility for SACD and other new-generation audio formats.
  • Consists of a pure balance amplifier in which the XLR balance input does not have to pass through a transformer, an inversion amplifier, etc.
  • Makes use of a simple two-stage amplification structure based on rigorously selected low-noise FET. The load resistance makes use of non-inductive coil resistance manufactured by Dale, thus realizing straightforward properties that take advantage of the features of vacuum tubes and outstanding sound quality with a high level of clarity.
  • The output stage is designed to lower impedance by using a rigorously selected high voltage dual triode (6FQ7 type) in parallel connection, which has resulted in an improvement in dynamic range especially in the high frequency.
  • The heater power source for the vacuum tube makes use of a power circuit of the DC ignition type using an electrolytic condenser and a high-speed Schottky barrier diode, bringing about further improvements in the SN ratio.
  • Makes use of a large-capacity power transformer and capacitor.
  • Equipped with one XLR (balance) input system and two RCA (imbalance) input systems, meaning that there is a total of three input systems.
  • In the case of the RCA input, switching with the earth side ensures that there is almost no interference between devices.
  • Use is made of a high sound quality quadruple volume unit which makes possible XLR input as well as all kinds of line level analog voice inputs.
  • The RCA terminal “Input 1” is equipped with parallel output terminals and enables input throughout. Connection with other pre-amplifiers and recording decks, etc., is also possible.

 

Mer information

Specifications

Frequency response: DC – 100 kHz / +0, -1.5 dB
Rated input level: 200 mV with 100 V output
Max input level: 30 V rms with volume at minimum setting
Gain: 54 dB
THD max: 0.01% (1 kHz/100 V rms output)
Input impedance: 50 kOhms
Max output voltage: 340 V rms/1 kHz
Dimensions: (mm) 195W x 103H x 420D, including knobs and terminals)
Weight: 4.7 kg

Color

Black, Silver

Recensioner

Det finns inga produktrecensioner än.

Bli först med att recensera ”STAX SRM-007T2 DRIVER”

Denna webbplats använder Akismet för att minska skräppost. Lär dig hur din kommentardata bearbetas.