McIntosh MTI100

94,200kr

leasing
2091kr/mån
Info Läs mer om leasing.
Wasa Kredit AB
Leasing Betala från 1 742 kronor i månaden
Totalbelopp 94 200 kr
Uppläggningsavgift 550 kr
Avtalstid Månadsavgift Restvärde
36 mån 2 675 kr 9 420 kr
48 mån 2 091 kr 9 420 kr
60 mån 1 742 kr 9 420 kr
Samtliga belopp är exkl. moms
Leasing via Wasa Kredit
– den smarta finansieringslösningen
Wasa Kredit äger varorna under leasingperioden, ert företag har nyttjanderätt. Månadsavgiften är avdragsgill. I slutet av avtalstiden köper du loss varorna för restvärdet. Leasing erbjuds för köp från 2 400 till 2 000 000 kronor.
Så här gör du:
Varukorg Lägg varorna i varukorgen och gå till kassan.
Avtalstid Välj mellan avtalstiderna 36, 48 eller 60 månader.
Kort Avtalsprocessen är automatiserad och kreditkontroll görs direkt i kassan.
Mobil Slutför beställningen med signering av BankID av bolagets firmatecknare.
Avtal När avtalet godkänts kan varorna levereras.

För samman dåtid och nutid med en helt integrerad skivspelare med försteg, förstärkare och streamingmöjlighet!

Alltid
  • Snabba leveranser
  • Fri frakt i Sverige på varor över 500 SEK
  • Garanterat säkra betalningar
  • Kort, Delbetalning, Faktura, Leasing, Swish och PayPal

CARTRIDGE SPECIFICATIONS
Cartridge Type – Moving Magnet
Output Level – 4mV at 1kHz
Load Impedance – 47k Ohms
Frequency Response – 12Hz to 30kHz
Channel Separation – 30dB at 1kHz
Compliance – 12 x 10-6 cm/dyne
Recommended Tracking Force – 2.0 g
Channel Difference – Less than 1dB at 1kHz
Total Mass – 6.5 g
Stylus – Elliptical
Cantilever Material – Aluminum

TONEARM SPECIFICATIONS
Bearing – Lateral type bearing
Arm Tube – Damped machined aluminum
Counterweight – Concentric
Adjustments – None

TURNTABLE SPECIFICATIONS
Playback Speeds – 33-1/3 and 45 rpm
Motor Type – Permanent magnet AC synchronous
Speed Control – Manual speed change via a 2 speed pulley
Platter – Aluminum
Platter Bearing – Oil bath bearing with a high performance polyetheretherketone (PEEK) thrust disc and machined graphite impregnated brass bushings
Signal To Noise Ratio – 35dB – 40dB
Wow & Flutter – 0.1%

CONNECTIVITY
Stereo Outputs Unbalanced – 1 (bridged to AMP IN)
Stereo Inputs Unbalanced – 1
Digital Coaxial Input – 1
Digital Optical Input – 1
Subwoofer Output – 1
Wireless Input – High Definition Bluetooth 4.2

CONTROL
Power Control Input – 0
Power Control Output – 1
Platter Light – N/A
Speed Control Fine Adjustment – No

ELECTRONIC SPECIFICATIONS
Power Output per Channel – 50 Watts into 8 Ohms. 80 Watts into 4 Ohms
Number of Channels – 2
Speaker Impedance – 4 or 8 Ohms
Rated Power Band – 20Hz to 20kHz
Total Harmonic Distortion – 0.5% (Amplifier). 0.2% (Preamplifier)
Dynamic Headroom – 1.0dB (8 Ohms. 1.3dB (4 Ohms)
Signal To Noise Ratio (Moving Magnet) – 75dB
Signal To Noise Ratio (High Level) – 90dB
Damping Factor – 8 Ohms: >200. 4 Ohms: >100
Maximum Output (Balanced / Unbalanced) – 9V Unbalanced

GENERAL SPECIFICATIONS
Dust Cover Included – No

WEIGHTS & DIMENSIONS
Dimensions (W x H x D) – 19-1/4” (48.9cm) x 6-3/4” (17.15cm) x 14” (35.6cm)
Weight – 33.5 lbs (15.2 kg)
Shipping Weight – 40.5 lbs (18.4 kg)

MER INFORMATION HÄR

About the MTI 100
At first glance, the McIntosh MTI100 Integrated Turntable may look like it’s just a turntable, but a closer look will reveal that it is in fact so much more.

Truly a one-of-a-kind product, it is designed for those who want maximum flexibility in their home audio system but don’t want – or don’t have the space for – a large audio system in their home.

With all the built-in connectivity the MTI100 offers, it can become the center piece of a modern home audio system for modern lifestyles. Simply add your favorite speakers of choice (such as our XR50 bookshelf or XR100 floorstanding speakers) and you’ll have a complete and comprehensive audio system.

Besides the turntable that plays both 33-1/3 and 45 rpm vinyl records, the MTI100 also includes a power amplifier, a vacuum tube preamplifier section, a shielded phono preamplifier, an unbalanced auxiliary input, digital audio coaxial and optical inputs, a Bluetooth receiver, a subwoofer output, stereo speaker outputs for sharing your music with friends, and a headphone jack for personal listening.

Features

  • Turntable
  • Amplifier
  • Vacuum tube preamplifier
  • Phono preamplifier
  • Analog input
  • Digital inputs
  • Bluetooth® receiver
  • Speaker outputs
  • Subwoofer output
  • Headphone jack
  • McIntosh engineering
  • What else do I need? Just add your music and speakers.

Physical Attributes
The 7 pound (3.18 kg) machined aluminum platter resides on the top of the unit.

This and the matching machined aluminum tonearm with anti-skate sit atop a 3/8” (9.5mm) thick piece of glass – the same glass found in the front panels of our larger amplifiers; this in turn sits atop a custom 1/4” (6.35mm) thick metal plate that adds stability.

The combined heftiness of both the platter and metal plate helps resist and absorb noise that could be caused by external vibrations.

MTI100 Angle

Integrated Amplifier
A Class D amplifier that’s rated for 80 Watts per channel into 4 Ohms or 50 Watts per channel into 8 Ohms is used to drive a pair of speakers (sold separately) that are connected via the back panel speaker binding posts.

Two 12AX7 vacuum tubes power the main preamplifier section, while a separate dedicated phono preamplifier is housed in a custom shielding box that prevents interference or noise from seeping into the vinyl signal.

Together, the vacuum tube preamplifier and shielded phono preamplifier are a perfect choice to help make your vinyl albums sound their best.

MTI100 Top

Analog And Digital
To combine playing vintage vinyl records with modern playback methods, you can also stream music to the MTI100 via its High Definition Bluetooth 4.2 input that ensures you receive the best sound quality possible from your Bluetooth device.

An external Bluetooth antenna helps achieve optimal reception and signal quality.

The analog and digital audio inputs allow external sources, such as a TV, tuner or CD Player, to be connected. Not to overlook the impact that low sound frequencies can add, a subwoofer output is also included.

Finally, for personal listening, the front panel includes a headphone jack that is powered by our High Drive headphone amplifier, which features increased gain and output power and is optimized for virtually all headphone types.

Controls
Power, volume and input selection can be controlled by either the included remote or via two knobs on the unit.

An illuminated McIntosh logo is located in the top glass panel, while a classic McIntosh-styled die cast aluminum name badge adorns the front of the chassis.

MTI100 Controls

 

Recensioner

Det finns inga produktrecensioner än.

Bli först med att recensera ”McIntosh MTI100”

Denna webbplats använder Akismet för att minska skräppost. Lär dig hur din kommentardata bearbetas.