Hedd Quantum AD / DA
In HEDD Quantum, the sub ps jitter clocking is applied to both the AD and the DA
The result is very good imaging, a very open 3d sound, and very detailed transit response, it is very accurate
Optical in and out have been added, toslink
HEDD Quantum as a master clock
There are 6 new WC outputs that allow HEDD Quantum to be used as a master clock at the same time that the AD and DA are being used
In addition to the new AD, DA, Clocking, I/O and WC outputs. HEDD Quantum still has the same great DSP emulation of Triode, Pentode tubes and Tape emulation
Operational modes allow the DA and the AD to be used at the same time, at different sample rates. In the DIGI setting the unit will run digital in from one of three sources and output on all three digital outputs and the analog output at the same time.
In the ANA mode the input is analog and it outputs on all three digital outputs and the analog output at the same time.
Dither, which is analog generated, is selectable for 16 or 20 bit
The AD, DA and ASRC chips are the high end AKM 32 bit parts, coupled with proprietary analog filtering and clocking
Analog Output: Transformerless balanced floating stereo output on XLR-m connectors. The default calibration is +20 dBu = Digital zero. Gain adjust trims are on the back panel. The maximun analog output is +24.5 dBu
Analog Input: Transformerless balanced floating stereo output on XLR-m connectors. The default calibration is +20 dBu = Digital zero. Gain adjust trims are on the back panel. The analog input range for 0 dbfs is adjustable form +16 to +26 dBu
Word Clock Input: BNC connector takes a TTL level signal at the sample rate to sync the A\D to the external sample rate. HEDD will sync from 20 kHz to 192K kHz. The input impedance is 75 ohms.
Word Clock Outputs: these BNC connectors are a TTL level square wave that can be used to provide sync to other equipment. The WC outputs will be at the selected sample rate or the rate of the WC input.
Internal Sample Rate: 44.1kHz to 192kHz determined by front panel switch. S/PDIF Input: Unbalanced digital input 75 ohms RCA connector
S/PDIF Output: Unbalanced digital output 75 ohms RCA connector
AES Input: Balanced digital input 110 ohms XLR connector
AES Output: Balanced digital output 110 ohms XLR connector Optical In / Out: this is the toslink format.
Power: 25 watts at 115 or 230 volts, 50 or 60 Hz.
Fuse size is MDL .3A for 115 volts; MDL .25A for 230 volts Pilot Lamp: #7335 lamp
Shipping Weight: 15lbs (6.7kg)