Tack för att du väljer produkter med hög kvalitet!

Du har produkten längre, har mer glädje av den, det är ekonomiskt och bättre för vår planet. Vi kommer att göra vårt bästa för snabb och säker leverans. Tveka inte att höra av dig om du har frågor.

 

Genuin Audio Drive *Kit*

Strength is to be found in serenity.

168,990kr

Se alla betaltjänster:

KLARNA, DINTERO, PAYPAL, WASA

Önskar du rådgivning inför val av produkt?

Hör gärna av dig till oss!

Drive-The Perfect Turntable
Genuin Drive is a turntable that makes itself acoustically invisible. The main goal of its development was to avoid the addition of vibrations that are not originally present on the vinyl. This high-end record player does not have a sound, but a single task: to reproduce music in its pure form without any distortion.

For this purpose, it is essential to keep the extremely fragile process of record tracking away from all harmful external influences – whether it’s impact noise or any form of resonance. Such overlapping of the actual music signal leads to the music unfolding unnaturally. In order to avoid these impairments, the record must be “calmed” during the playback process. That’s what the Genuin Audio drive does. With impressive results – you now hear pure music.

Torsion Bar Concept
The drive is based on a sub chassis design, in which three torsion bars carry the suspension. Each of the three height-adjustable spring elements can be individually tuned to an identical resonant frequency of the sub chassis-independent of the respective load of the three spring positions. This avoids uncontrollable tumbling movements of the sub chassis. The turntable immediately returns to its default position after an impulse. The feared repeated oscillation of the sub chassis drive does not take place here.

Each of the three bearings consists of a base plate that is pivoted on the plate made of artificial stone. The tensioned torsion spring consists of two superimposed spring plates made of high-precision spring material. The twisting produces the required spring force and the friction between the two spring plates during the twisting produces the desired damping, so that vibrations quickly decay. The rubber element connects the spring arm to the sub chassis and ensures a coordinated horizontal guidance. Once it has been set at the factory, the position of the sub chassis in the housing never changes again.

Multi-stage Damping
The sub chassis, made of high-damping, foamed aluminium material, is a carrier for the plate bearing, the motor unit and the arm board. The motor unit and the arm board are each mounted via rubber composite elements and made of artificial stone. Both are coupled to the sub chassis via high-attenuation material to eliminate vibrations. The drive motor is intentionally positioned on the sub chassis to connect the platter and the drive as firmly as possible together. The base of the record player is a sandwich made of MDF and artificial stone with an intermediate damping layer of cork. The artificial stone slab carries the three torsion bar spring bearings and is screwed to the outer housing, which is made of MDF.

These measures have been taken to produce multiple damping effects by combining different materials at as many (contact) points as possible. The potentially harmful external influence of the drive itself on the vinyl reproduction is eliminated. This concept continues with the platter. It is a sandwich construction consisting of two artificial stone washers with a dampening intermediate layer. The bearing for the platter is a 10mm slide bearing with axial bearing over a steel ball on a support plate made of Delrin.

Fine Tuning
The three independently adjustable torsion spring elements are mounted on the base plate. At the factory, the drive is aligned to a resonance frequency of 4.5 – 5 Hz. However, the height adjustment can be adjusted from below the floor of the Drive if additional weights such as pucks affect the position of the sub chassis.

The platter is driven by a synchronous motor via a round belt. The belt tension can be varied within a range of ±5 mm. In this way, the ratio of the musical drive and the smoothness can be adapted to your own preferences. Both of these are set on the top of the unit. There is also a keypad with illuminated buttons for on/off and speed selection. The two speeds 33 1/3 and 45 rpm can be adjusted by means of a potentiometer on the back of the Drive. The motor is driven by an internal motor control, while the power supply is by means of an external power supply.

The Premotec engine is bolted onto a motor carrier made of POM, which in turn is pivoted on the engine board made of artificial stone. The entire motor board is bolted to the sub chassis by means of three rubber compound elements, with an additional damping element between the sub chassis plate and the artificial stone plate effectively dampening the engine vibrations.

Point-accurate Partnership
The turntable Drive has a congenial partner in Genuin Audio’s tonearm Point. The tonearm is screwed to the arm board with its base tube of 18 millimetres by means of a massive pressure plate and an M8 screw, which is of particular importance for a “crisp”, sharply accentuated reproduction. In this way, again, sound-damaging influences by externally applied vibrations are avoided.

The high-quality LEMO socket, which connects the tonearm cable to the balanced XLR or RCA jacks, is integrated into the arm board. The high-quality cable was wired all the way through to reduce interference points. It is ready for the perfect partner – the Genuin Audio MC cartridge Sting.

Variations
A Genuin Drive can be manufactured in different versions for you. Depending on the customer’s requirements, the Drive includes, in addition to the motor control, the tonearm Point, the cartridge Sting or the integrated phono preamp Pearl with symmetrical signal routing for MC cartridges and a variety of setting options.

This kit contain the Genuin Audio Drive turntable, genuin Audio Sting cartridge, Genuin Audio Point tonearm and the
Genuin Audio Pearl i Integrated Phonostage.

Normal price for buying all parts separate is 188250 Sek

 

Detta kit består av Genuin Audio Drive skivspelare, Genuin Audio Sting pick up, Genuin Audio Point tonarm och
Genuin Audio Pearl i Integrerade Phonosteg.

Ordinarie pris för att köpa de olika delarna var för sig är 188250 Sek

Ytterligare information

Specifications

Genuin Audio Drive Turntable-
Chassis Base mounted on 3 spikes, sandwich construction made of MDF/cork/Corian
Subchassis made of high-damping, porous aluminium material
Subchassis Suspension by means of self-damping torsion springs
Torsion Bars self-damping, adjustable in spring rate and resonance frequency
Torsion Bar Adjustment 3 adjustment points at the bottom
Motor Board Corian, decoupled and damped
Drive Synchronous motor and specially developed control electronics
Keypad illuminated, for 0, 33 1/3, and 45 rpm
Fine Adjustment at the rear with potentiometers, for 33 1/3 and 45 rpm
Power Supply external
Motor Pulley Material POM
Belt round cord, adjustable distance 10 mm
Sliding Plate Bearing 10 millimetre plain bearing, mounted on steel ball and Delrin support plate
Turntable Corian sandwich construction (2x) with damping self-adhesive intermediate layer
Arm Board made of Corian, high-strength bolted in the tonearm area base, decoupled and the remaining area dampened
Plinth two-part; MDF plus real wood side framing

Phono Preamplifier Pearl

Suitable For Moving Coil (MC) / Moving Magnet (MM)
Construction (MC) symmetrical
Resistance Loading (MC) 2 kOhm, 1 kOhm, 500 Ohm, 250 Ohm, 125 Ohm
Gain (MC) 20, 22, 24, 26, 28 dB
Common Mode Rejection > 90 dB between 20 Hz and 20 kHz
Signal-to-noise ratio at 61 dB gain (MC) > 62 dB linear / > 70 dB Awtd / > 69 dB CCIR 2k
Resistance Loading (MM) 47 kOhm
Capacitance Loading (MM) 50pF, 100pF, 150pF, 200pF, 250pF
Equalization (MM) RIAA without Neumann Time constant
RIAA Tolerance (MM) < +- 0.3 dB (< 0.1 dB is typical)
Channel Offset (MM) < 0.15 dB
Gain (MM) 37 dB, 39 dB, 41 dB, 43 dB, 45 dB
Signal-to-noise Ratio at 41 dB gain (dB) > 83 dB linear / > 90 dB Awtd / > 89 dB CCIR 2k
Subsonic Filter switchable; 15Hz/18dB/Octave Butterworth
Overload Indication > 16 dB over 10 mV/1 kHz MM input
THD & Noise Distortion < 0.001% between 20 Hz and 20 kHz
Intermodulation 19 kHz / 20 kHz < 0.001%
Headroom > 20 dB; each for MM and MC
Output Resistance 50 Ohm
Power Supply external, ring core transformer 250 V, line filter

Genuin Audio Sting Cartridge-
Technical Set-Up Open cartridge fixed in the system body with a graphite fibre compound
Operating Principle Moving Coil
Output Voltage 0.45mV at 1kHz and 5.6cm/s horizontal
Channel Balance <1dB
Channel Separation >25 dB
Generator Impedance 40 Ohms plus/minus 20% at 1 kHz
Compliance approx. 10×10 high minus 6 dynet
Tracking Force 2.5p plus/minus 0.3p
Frequency Response 20Hz to 45kHz
Cantilever Boron Tube
Stylus Diamond Van den Hul
Additional Magnet Large iron-neodymium type for field linearization and intermodulation reduction
Weight 11.1p
Suggested Load Impedance > 100 Ohm, recommended 1000 Ohm
Tracking Ability with a suitable tone arm at 2.5p >80μm (Ortofon Test Record)
Special Features • Integrated 2.5 mm thread
• Resonance-reducing milled longitudinal and transverse grooves
• Protective device for the soldered wires at the connection pins

Genuin Audio Point Tonearm-
Principle Unipivot tonearm
Geometry 10″ Baerwald Löfgren
Effective Length 254mm (10″)
Overhang 16.2 mm
Offset Angle 21.6°
Special Features • special unipivot bearing construction with bearing bush and bearing point
• Bearing bushing made of ball bearing elements, geometry matched to precise guidance in the horizontal plane to exactly one fixed pivot point
• Bearing point consisting of adjusting screw and welded bearing ball
• Bearing absolutely play-free and yet extremely damped, no unipivot tilting
• Tone base adjustable for VTA
• Tonearm azimuth adjustable by means of adjustable balancing weight
• Basic adjustment by means of adjustable weight cylinders
• Extremely low-lying counterweights for stable position
• Tracking force adjustment by damped rotatable weight
• Solid aluminium headshell for optimum stiffness
• Tonearm tube made of carbon fibre
• Tonearm tube dampened by inner second carbon tube and tuned resonance weight
• Anti-skating with adjustable weight and micro-string on the level of the unipivot bearing without influence on VTA
• Connection with high quality LEMO plugs and sockets
• Tonearm top detachable and replaceable against pre-set additional tonearm tops with alternative cartridges

Genuin Audio Integrated Phonostage
Phono Preamplifier
Suitable For Moving Coil (MC) / Moving Magnet (MM)
Construction (MC) symmetrical
Resistance Loading (MC) 2 kOhm, 1 kOhm, 500 Ohm, 250 Ohm, 125 Ohm
Gain (MC) 20, 22, 24, 26, 28 dB
Common Mode Rejection > 90 dB between 20 Hz and 20 kHz
Signal-to-noise ratio at 61 dB gain (MC) > 62 dB linear / > 70 dB Awtd / > 69 dB CCIR 2k
Resistance Loading (MM) 47 kOhm
Capacitance Loading (MM) 50pF, 100pF, 150pF, 200pF, 250pF
Equalization (MM) RIAA without Neumann Time constant
RIAA Tolerance (MM) < +- 0.3 dB (< 0.1 dB is typical)
Channel Offset (MM) < 0.15 dB
Gain (MM) 37 dB, 39 dB, 41 dB, 43 dB, 45 dB
Signal-to-noise Ratio at 41 dB gain (dB) > 83 dB linear / > 90 dB Awtd / > 89 dB CCIR 2k
Subsonic Filter switchable; 15Hz/18dB/Octave Butterworth
Overload Indication > 16 dB over 10 mV/1 kHz MM input
THD & Noise Distortion < 0.001% between 20 Hz and 20 kHz
Intermodulation 19 kHz / 20 kHz < 0.001%
Headroom > 20 dB; each for MM and MC
Output Resistance 50 Ohm
Power Supply external, ring core transformer 250 V, line filter

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.