Bryston TF-2, Phono Step-up Transformer

16,545kr

367kr/mån

Så funkar leasing

  1. Leasing erbjuds företag på köp från 2 400 kr till 2 000 000 kr.
  2. Beställningen slutförs med BankID av bolagets firmatecknare i kassan. Är det fler firmatecknare som ska signera så fyller du i deras epost för att skicka en signeringslänk.
  3. Wasa Kredit äger utrustningen under leasingperioden, ert företag har nyttjanderätt. Månadskostnaden är fullt avdragsgill och ni behöver inte göra avskrivningar på utrustningen. Efter periodens slut övergår ägandet till ert företag för det förutbestämda restvärdet.

Räkneexempel för varukorg 16 545.00 kr

367 kr per månad i 48 månader. Restvärde 1 654 kr. Uppläggningsavgift 450 kr.

TF-2 Phono Step-up Transformer
Low output moving coil cartridges are well loved for their detail and nuance, but need more gain than what most active preamps can provide. Too much active gain for these low-output carts introduces noise and distortion, so let your first gain stage be the TF-2 passive step-up transformer. The TF-2 adds 20 or 31dB of gain (choose at time of purchase), entirely with high quality wide bandwidth transformers and no active parts. Use the TF-2 with a Bryston BP-2 MM active gain stage or with your existing phono preamp.

Nollställ
Artikelnr: bryston-tf-2 Kategorier: , , , , Taggar: , , Brand:

Features:
Fully passive transformer based step-up
All steel chassis and top
Wide bandwidth, very low phase shift
Compatible with Bryston BP-2 MM and other active gain stages
High common mode rejection of 120dB at 60Hz
All steel chassis and top
Low distortion
Options:
Available with a silver or black faceplate
Available in 20dB or 30dB gain configuration
Specifications:
Frequency Response: 0.5dB @ 20Hz, 0.1dB @ 20kHz, 40dBu 20Hz – 20kHz
Gain: TF-2 20 – 20dB, TF-2 30 – 31dB
Sensitivity: TF-2 20 – 0.5 mV, TF-2 30 – 0.1 mV
THD(@1kHz, -60dBu): <0.001%
Output Impedance: TF-2 20 – 4.71kΩ, TF-2 30 – 4.85kΩ
Physical:
2.75″ H x 5.7″ W x 8.25″ D
57mm H x 145mm W x 210mm D

MER INFORMATION HÄR

TF-2 Phono Step-up Transformer

Low output moving coil cartridges are well loved for their detail and nuance, but need more gain than what most active preamps can provide. Too much active gain for these low-output carts introduces noise and distortion, so let your first gain stage be the TF-2 passive step-up transformer.

The entirely with high quality wide bandwidth transformers and no active parts. Use the TF-2 with a Bryston BP-2 MM active gain stage or with your existing phono preamp.

Inputs: 2x RCA, 1x Turntable Ground
Outputs: 2x RCA

Good things come in small packages

A new 5.7 inch wide form factor originally developed for specialty digital components is a perfect fit for Bryston’s new phono electronics.

Several challenges make developing a high resolution phono playback chain unique. In particular, the extremely low voltages from a cartridge are o en less than 1 millivolt! Such small signals are susceptible to noise from other nearby electronics, distortions in the power line, and even other electronics in the same box.

Bryston has engineered our new phono playback system to mitigate these challenges. Each function can be fully contained in a separate chassis. An important side benefit is that rather than spending money for features you may not need or that may already exist in other equipment you already own, you may simply buy the components you need.

Every amplification circuit is built on a power supply. Bryston’s new PS-3 Power Supply transforms your AC line voltage into an ultra-stable and linear DC voltage used by your gain stage.

Bryston Ltd.

Bryston Ltd. has been designing and manufacturing state of the art specialty electronics to both the consumer and professional audio marketplaces for over 35 years.
Bryston has a major commitment in producing the most accurate and reliable product available by maintaining an extensive research and development division which is constantly looking for ways to improve the performance, value, and reliability of our products.

Bryston engineers are never constrained by design costs for functionality. On the contrary, Bryston challenges their engineers to create the finest products they can; to source and use the best components; to move Bryston equipment ever-closer to perfection, while maximizing performance and reliability.

Following in the fine tradition of artisan craftsmanship worldwide, every audio component is handcrafted by people who take tremendous pride in building the very best. Each component is hand selected and installed, every wire is cut and bent by hand, and every connection is hand soldered.

In the consumer market Bryston manufactures state of the art audio electronics intended to provide the owner with the most musically accurate and reliable performance available. In the professional market Bryston offers amplifiers for recording studios, radio and television broadcast facilities, and sound reinforcement applications such as stadiums and arenas, etc.

Each of Bryston’s fully assembled products is extensively tested before shipment. During 100 hours of continuous testing, Bryston amplifiers are monitored through a range of input cycles and thermal stress levels to duplicate a broad spectrum of operational loads. If any failures occur, Bryston will catch them during the manufacturing process, before you begin using the product.

Bryston’s dedication to creating the most reliable products is clearly evident in their 20 year analog and 5 year digital warranty.

Bryston products allow you to enjoy a generation of sound, music, and incredible performance. Bryston is based in Peterborough, Ontario, Canada, just northeast of Toronto, and is sold through over 150 dealers in North America and 60 countries worldwide.

Our goal

For over 30 years, Bryston has had a continuing commitment to design and manufacture the most accurate and reliable audio electronics.

The performance, value, and reliability of our amplifiers, and our unrivaled warranty, have brought us recognition in the world of pro audio, as well as with reviewers and home users. But there is no product that cannot be made better. To this end, we maintain an extensive research and development program, constantly investigating techniques, technologies, and devices that promise improvements to all aspects of our amplifiers.

The Bryston SST2 C–Series is the direct result of this on-going quest, and represents a significant step forward in the art and science of audio amplification.

Color

Black, Silver